Alright, so I’ve been putting some time into College Football 25 lately, really trying to get the hang of the defensive side of the ball again. One thing I really wanted to nail down was forcing turnovers, specifically stripping the football.
My First Tries Were Rough
Honestly, at first, I was just laying the wood. You know, hitting the tackle button hard, hoping the ball would just pop out by sheer force. Sometimes it did, sure, mostly with my big hitters. But it wasn’t consistent. I felt like I was leaving opportunities on the field. I tried just running into the ball carrier at weird angles too, thinking maybe that’d knock it loose. Didn’t really have a strategy, just chaos.
Then I remembered older games sometimes had a specific button for it. So I started experimenting a bit during plays. Probably mashed every button on the controller at some point while near the ball carrier. Mostly just ended up diving too early or getting stiff-armed into next week. It was pretty frustrating, felt like I was missing something obvious.
Figuring Out the Strip Button
So, I finally decided to stop guessing and actually lab it out. Went into the practice mode, set up some simple running plays against the CPU. This is where I actually started figuring things out.
After a bunch of trial and error, I zoned in on the Right Bumper (RB or R1 depending on your controller). Bingo. When I timed it right, my defender would actually make a swiping animation towards the ball. It wasn’t just a regular tackle anymore.
But just knowing the button wasn’t enough. Mashing it constantly while chasing someone just got me nowhere, maybe even slowed my guy down. The timing and positioning seemed super important.

Getting the Timing Down
Okay, here’s what I found worked best through practice:
- Get Close: You gotta be right up on the ball carrier. Not miles away, not already locked into a tackle animation. Think shoulder-to-shoulder or just slightly behind and to the side.
- Timing is Key: Don’t hit the strip button too early when you’re still closing in. Wait until you’re actually making contact or are right beside the ball carrier’s arm. It seems like a quick tap is better than holding it down.
- Player Matters: This was a big one. My defensive backs and linebackers with higher ratings for tackling or maybe even a specific strip trait (if that’s in the game, still figuring that out) were WAY more successful. My defensive linemen trying it? Not so much, unless the QB was already being sacked.
- Angle Helps: Coming in from the side or slightly behind seemed more effective than trying to strip head-on. Makes sense, you’re closer to the ball and the arm.
Seeing it Work in Games
Once I started consciously thinking about position and timing, and using that RB/R1 button at the right moment, I started seeing results. Began popping the ball loose way more often, especially in situations where a big hit wasn’t really possible, like chasing a guy down from behind near the sideline.
It’s not foolproof, mind you. Sometimes you just get a normal tackle, sometimes you miss, and sometimes you get flagged for a facemask if the animation goes wonky or you hit it at a bad angle, which is annoying. But when it works? Oh man, grabbing that loose ball feels good. Definitely changed how I approach defense when I get near the ball carrier.
So yeah, that’s my journey with the strip mechanic so far. Get close, use that bumper button (RB/R1), time it right, and hope your player has the skill to pull it off. It takes practice, but it’s worth adding to your defensive toolkit.